Skylight installation in Dallas

Curb, flashing and glass — the flashing is the job

Skylight Installation in Dallas TX for Dry, Bright Rooms

A skylight in Dallas is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. We install skylights across Dallas — the curb framed, the skylight set on it, and the flashing woven around the curb so the water runs over the joints. The glass is the easy part. The flashing is the job, and the flashing is what keeps the roof dry.

Open 24 hours, every dayItemised written quotePhotos at every stage
Call firstTell us about the room — where it is, what light it needs — and we talk through what happens next
Safety before speedWe check the roof and the room before any opening is cut
Diagnose the causeWe plan the opening around the roof structure, not just the room below
Approve the workYou see the written scope before anything is cut or framed

What's included

What skylight installation includes

A skylight installation in Dallas is a roofing job first and a window job second: the opening, the curb, the flashing and the glass — each part fitted to the roof, each joint lapped so the water runs over it.

01

Curb framed properly

The opening is cut in the decking and the curb is framed, raised above the roof surface so the water runs around it, not into it.

02

Flashing woven around the curb

Step flashing and counter flashing are woven around the curb with new metal, so the water runs over the joints. The flashing is the job, and it is done with new metal.

03

Fixed or venting

A fixed skylight suits a hallway or a living room where the light is the point. A venting skylight opens to let the steam and the heat out, which suits a bathroom or a kitchen.

04

Every roof, a different detail

The flashing detail is different on shingle, tile, metal and flat roofs, and the curb is framed to suit the roof. A skylight on a flat roof needs a curb raised higher.

05

Interior finished

The interior is finished around the opening, so the skylight looks like it was always there, not added after.

06

Documented throughout

Photos of the opening, the curb, the flashing and the finished skylight, so you can see what the work was and what it is now.

Service overview

What skylight installation in Dallas actually involves

Skylight installation in Dallas is the fitting of a skylight to a roof: a framed opening in the decking, a curb raised above the roof surface, the skylight set on the curb, and the flashing woven around it so the water runs over the joints. The work is a roofing job first and a window job second, because the roof has to stay dry.

A skylight in Dallas is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. The installation starts with the curb: a framed opening in the decking, raised above the roof surface, with the skylight set on it and the flashing woven around the curb so the water runs over the joints. The glass is the easy part — the flashing is the job. A skylight that is installed with new flashing, new step flashing and new counter flashing, will not leak; a skylight that is set into old flashing will.

The flashing is the jobA skylight is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. The installation is the curb, the flashing and the glass together — and the flashing is the job.
Leaks are flashing, not glassMost skylight leaks are flashing leaks, not glass leaks. The flashing around the curb is what keeps the water out, which is why a skylight that is set into old flashing will leak, and a skylight that is installed with new flashing will not.
Every roof, a different detailA skylight can be installed on most roof types, but the flashing detail is different on each, and the curb is framed to suit the roof. A skylight on a flat roof needs a curb raised higher, so the water does not pond against it.
Crew installing a skylight on a Dallas roof
How we workWe verify the cause, compare realistic options, and confirm the work before we leave.

The service timeline

What to expect during your skylight installation

The order is the same on every skylight installation, whatever the room.

01

Inspection

We look at the roof and the room, checking the slope, the structure and the light the room needs. You get photos and a written scope.

Stage 1
02

Scope

The written scope names the skylight size and type, the curb, the flashing, and the interior finish around the opening, so the job is agreed before anything is cut.

Stage 2
03

Opening and curb

The opening is cut in the decking, the curb is framed and raised above the roof surface, and the skylight is set on the curb.

Stage 3
04

Flashing

Step flashing and counter flashing are woven around the curb with new metal, so the water runs over the joints, and the shingles are re-set around the curb.

Stage 4
05

Finish and walkthrough

The interior is finished around the opening, the ground is swept with a magnet, and a walk of the skylight with you. You receive the photos and paperwork for the job.

Stage 5

Tools & methods

Tools and methods we use on your skylights

Skylight tools are for framing and flashing — the saw, the snips and the brake, in that order.

01

Circular saw and framing tools

Cuts the opening in the decking and frames the curb, raised above the roof surface so the water runs around it, not into it.

02

Tin snips and brake

Cuts and folds the step flashing and counter flashing to fit the curb exactly, so the water runs over the joints.

03

Pry bar and shingle remover

Lifts the courses around the opening without tearing the good shingles, so the flashing weaves in cleanly.

04

Sealant

Seals the joints where the detail calls for it — at counter flashing, laps and terminations — never as a substitute for new metal.

05

Roofing nail gun

Fastens the replacement shingles around the curb at the manufacturer's pattern and depth, so the repair holds in a 115 mph design wind.

06

Level and square

Sets the curb level and square, so the skylight sits properly and the flashing laps correctly on every side.

07

Interior finish tools

Finishes the ceiling around the opening, so the skylight looks like it was always there, not added after.

Use cases

When Dallas homeowners call us for skylights

These examples show how a skylight is installed around the flashing, not just the glass.

New skylight installed on a Dallas roof
Skylight added to a North Dallas hallwayA home in North Dallas where a dark hallway needed light, and the roof had no opening for it. A curb was framed, the skylight was set on it, and the flashing was woven around the curb so the water runs over the joints — the hallway is bright and the roof is dry.

Skylight in a Lakewood kitchen

A kitchen that was dark in the middle of the day, where the roof above it had a clear slope. A skylight was installed over the kitchen, the curb was flashed with new metal, and the ceiling was finished around the opening.

Skylight in a Preston Hollow bathroom

A bathroom with no window, where the roof above it was the only source of light. A skylight was fitted with a venting unit, so the bathroom gets light and the steam has a way out.

Problems we solve

Problems a skylight solves for Dallas homes

Most skylight installation calls are one of these four. Each one is a room that needs light, and a roof that has to stay dry.

ISSUE

Dark hallway or bathroom

We fit a skylight over the room, with the curb framed and the flashing woven around it, so the light comes in and the water stays out.

SIGN

Room with no window

A skylight is the only source of light for a room with no window. We set the opening over the room that needs it, and finish the interior around it.

SYMPTOM

Skylight that leaks

Most skylight leaks are flashing leaks, not glass leaks. We renew the flashing around the curb with new metal, so the water runs over the joints.

ALERT

Skylight fogging up

A skylight that fogs has lost its seal, and the glass has to be replaced. The flashing is checked at the same time, because a skylight that is opened is a skylight that should be flashed properly.

Cost factors

What shapes the cost of skylight installation in Dallas

SIZE, TYPE, AND THE ROOF AROUND THE OPENING

Phase 01

Size of the skylight

A larger skylight needs a larger opening, a larger curb and more flashing. The size is set by the room and the light it needs.

Phase 02

Fixed or venting

A venting skylight opens to let the steam and the heat out, and costs more than a fixed unit. The choice depends on the room.

Phase 03

Roof around the opening

The flashing detail is different on shingle, tile, metal and flat roofs, and the condition of the roof around the opening sets the scope.

Customer reviews

What Dallas Customers Say

5.0★★★★★41 Google reviews
★★★★★
“We hired Fonseca Brothers Roofing & Remodeling to replace our roof and fix water damage from a leak over our garage. We compared quotes from three roofing companies, and keith gave a mid range estimate, but his professionalism, clear communication, and honest approach made the decision easy.”
TM
Tyler MorrisonGoogle review · a month ago

Questions before we arrive

Skylight installation questions Dallas homeowners ask

Skylight Installation
Call (469) 960-7533
How much does skylight installation cost in Dallas?

It depends on the size of the skylight, whether it is fixed or venting, and the condition of the roof around the opening. A fixed skylight on a straightforward slope is a small job; a large venting unit is a bigger one. We inspect first and give you an itemised written quote for the installation as scoped.

Can a skylight be installed on any roof?

A skylight can be installed on most roof types — shingle, tile, metal and flat — but the flashing detail is different on each, and the curb is framed to suit the roof. A skylight on a flat roof needs a curb raised higher, so the water does not pond against it. The inspection sets out what your roof needs.

Should I choose a venting or fixed skylight?

Yes. A venting skylight opens to let the steam and the heat out, which suits a bathroom or a kitchen. A fixed skylight does not open, which suits a hallway or a living room where the light is the point. The choice depends on the room, not the roof.

Will a skylight leak?

A skylight is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. The installation is the curb, the flashing and the glass together — and the flashing is the job. A skylight that is installed with new flashing, new step flashing and new counter flashing, will not leak.

Ready when you are

Get your skylight installation Dallas TX quote

An inspection, photos, and an itemised written quote for the skylight installation as scoped. Call (469) 960-7533 and tell us about the room that needs light.

Skylight Installation

Talk with the local team

Request Skylight Installation

Call us at (469) 960-7533 or send a message and we will get back to you. We are open 24 hours, every day. Tell us about the room and the roof above it, and we will give you a straight answer on what it needs.

3919 Cedar Springs Rd, Dallas, TX 75219Main office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now